Sliding Patio Doors Repair
It is possible for sliding patio doors to be difficult to open and close. This could be due to a variety of issues, such as dirty tracks or improperly aligned rollers.
Clean the track first and making sure that the rollers are lubricated. You can also re-align the rollers by using the adjustment holes that are located on the bottom of the door panel that can be moved.
Dirty or damaged track
A dirty or damaged track can cause a sliding door to not slide smoothly. Over time dirt, grit and even rust could build up and block the track from being able to move smoothly. A gentle detergent and brush can do the trick. This job should be done regularly to ensure smooth operation and prevent expensive repairs in the future.
A leaky door can be a common problem. It requires immediate attention in order to prevent structural damage, water damage and mold growth. The most common cause is worn weather stripping and doors that are not aligned properly, which can be fixed by replacing old weather strips and aligning the door.
Rollers that jump off the track are another common issue that can be repaired with a simple DIY work. Recruit a friend to help you with this task as the door could be heavy. In the house, and then lean a panel towards you to shift the rollers. Once the panel is lifted off the bottom track, it's time to set it on sawhorses to keep it from falling off. Then loosen the screws that keep each roller in place and pry them out with a screwdriver. You can now clean any dirt that is caught between the wheel and the tracks. Then, clean each wheel using denatured alcohol on a cloth. Reposition the wheels on their tracks and attach them once more.
It is possible to straighten a bent section of track using a mallet made of rubber and a block of wood. If the bent section is close to hinges or has the potential to cause more damage, it's recommended to call in a professional.
Misaligned Rollers
If your sliding door isn't moving as it should, it's likely because the roller wheels aren't aligned with the track. The wheels may be dirty or rusted and their bearings are worn down. This creates friction between the floor of the door and the track, which causes it to snag or grind when it's opened or closed. This can also result in the sound of squeaking.
Fortunately it's an easy fix. You don't need to remove the door to access the wheels, as they are located on a bracket that's adjustable. Locate the holes for adjustment (usually on the opposite side of the frame) and make use of a screwdriver to turn the screws that control the wheels. Turning the screw clockwise will raise the wheel, whereas rotating it counterclockwise will lower it. Continue to adjust the door until it is open and shuts effortlessly.
It is important to adjust the wheel before making adjustments to your latch. The latch hooks need to be aligned with the strike plate (the opening into which the latch locks) to allow the lock to work correctly. If you don't do this, the latch may shut or open while you're not in the room.
Sliding patio door are an investment. Keeping them in good working order will keep your family safe. You can avoid costly repairs by addressing the most common issues, such as broken tracks, rollers, and handles. For assistance with your patio doors, get in touch with our team. We can assess your needs for repair of your sliding patio door and assist you in keeping it in good shape. Our experts are also able to assist with any replacement parts that you might require.
Loose or Damaged Door Frame
Sliding patio doors make a fantastic option for any home and offer a stylish and practical alternative to swing-open or hinged patio door options. Like any other hardware item sliding patio doors are prone to develop problems over time. Many of these issues can be fixed by using a bit of DIY expertise.
A gap in the frame is a typical problem with sliding patio doors. This could be caused by a variety of factors, including misaligned track or rollers or a damaged track door, or a bent frame for the door. In the majority of cases, this problem is easily solved by taking the doors off and reattaching the track. This must be done with extreme care so as not to harm the track or frame.
In certain situations, it may be necessary to replace the entire track. This is easily done with a universal replacement kit which is readily available at major hardware stores. These kits are simple to install and will have your door functioning properly again in no-time.
Regularly inspect your sliding door's hardware and frame for signs of wear, like loose bolts or screws. These are usually tightened using a screwdriver or wrench and is a simple and effective DIY patio door maintenance step. Additionally, it is important to lubricate your tracks and rollers to make sure they operate smoothly and prevent premature wear.
Patio doors are usually the primary entry point to the backyard and outdoor living space for a lot of homeowners. Therefore, they have to to function properly to ensure the safety of their home and provide security. If you follow these easy DIY maintenance tips, homeowners can prolong the life of their sliding patio door and save money on repairs or replacements.
Faulty Handle
The sliding patio doors are an excellent way to get into your home and get access to your backyard, but they can be difficult to operate if they become misaligned. A defective handle can cause the door not to shut or open properly. Fixing a loose handle can be accomplished at home.
In many cases the loose grip is the result of screws that have fallen out of the backplate. To remedy the issue tighten the screws that are on the inside of the handle with the help of a screwdriver. If you notice that the handle is loose, it could be an indication that the threads have worn and need to be replaced.
Alternatively, a broken latch could be the cause. This is more likely to occur if the latch is made of plastic instead of metal. If the latch isn't catching or turning, you should try oiling it first to see if it aids. If not, you may need to replace the lock entirely.
If the handle is damaged or broken, it can be difficult to operate. If this happens, it will be necessary to replace it with a new handle that matches the style of your sliding patio door.
Whether your patio doors are old and dated or new, Feldco can help you get them back on the right track. We have high-quality doors available in a variety of sizes and styles that can be adapted to fit your home perfectly. To learn more about our products, call us today! We serve Southern California homeowners, including Ventura County and Orange County.
Poor weatherstripping
It's time to replace your weather stripping if you notice light coming from windows and doors or feel a draft pulling towards the door or window. These strips create a secure seal that keeps unwanted insects, air, and water from getting into your home. They also help keep your heated and conditioned air inside, thereby saving energy costs all year round.
Depending on the age of your weather stripping it could have deflated and lost its bouncy positive seal. patio door repairs is easy to identify this by running a dollar note under the seal at the top and bottom of the jamb as well as the door frame, where they overlap. If the dollar bill slides effortlessly between the seal and the door, it's time to replace the weather stripping.
It's tempting to cut off just the worn area of weather stripping and then replace it, but this could cause cracks on both sides of the new stripping and could cause problems with the seal in the future. It is more efficient to replace all of the stripping. This will allow you to rest assured that your door will be properly sealed.
For a simple DIY project, follow our weather stripping project guide to remove old weather stripping. Then, you can apply the right material to your sliding patio door and frame for a lasting and secure seal. This is a great opportunity to save energy costs and fix your sliding patio door. Don't wait until its too late. You'll reduce your expenses and enhance the look of your home.